Cornat FAB535 Fabio Low Pressure Kitchen Sink Faucet Instruction Manual

1. הקדמה

This manual provides essential information for the safe installation, operation, and maintenance of your Cornat FAB535 Fabio Low Pressure Kitchen Sink Faucet. Please read these instructions carefully before installation and retain them for future reference.

2. זיכערקייַט אינפֿאָרמאַציע

• This faucet is designed exclusively for use with an electric low-pressure accumulator. Do not connect to a high-pressure water supply.
• זיכער מאַכן אַז אַלע וואַסער צושטעל רערן זענען פֿאַרמאַכט איידער איר אָנהייבן די אינסטאַלאַציע.
• אויב איר זענט נישט זיכער וועגן קיין טייל פון די אינסטאַלאַציע פּראָצעס, קאָנסולטירט אַ קוואַליפֿיצירטן פּלאָמבער.
• Regularly check for leaks after installation and during use.

3. פּראָדוקט איבערview

The Cornat FAB535 Fabio is a single-handle low-pressure kitchen sink faucet featuring a swivel spout and an extendable spray head. It is constructed from brass and finished with chrome.

Figure 3.1: Cornat FAB535 Fabio Low Pressure Kitchen Sink Faucet. This image displays the chrome-plated faucet with its single lever handle and the extendable spray head.

Figure 3.2: Product Dimensions. This diagram illustrates the key measurements of the faucet, including a spout height of 160 mm, a spout reach of 160 mm, and a base diameter of 55 mm.

4. סעטאַפּ און ייַנמאָנטירונג

The Cornat FAB535 faucet is designed for single-hole deck mount installation. Ensure you have all included mounting accessories before starting.

4.1 פאַר-ינסטאַלירונג טשעקס

• Verify that your water heating system uses an electric low-pressure accumulator. This faucet is not compatible with high-pressure systems.
• Confirm that the mounting surface is clean and stable.
• Gather necessary tools (e.g., adjustable wrench, screwdriver, sealant tape).

4.2 ינסטאַללאַטיאָן סטעפּס

1. Shut off Water Supply: Locate and turn off the main water supply to your sink.
2. צוגרייטן מאָנטירונג לאָך: Ensure the sink's mounting hole is clean and appropriately sized for a single-hole installation.
3. ינסטאַלירן קראַן: Insert the faucet base into the mounting hole. From underneath the sink, secure the faucet using the provided mounting accessories (washer, nut). Tighten firmly but do not overtighten.
4. פֿאַרבינדן וואַסער ליניעס: Attach the flexible connection hoses (350 mm length, KTW-A standard) to the corresponding hot and cold water supply valves. Ensure a watertight seal using sealant tape if necessary.
5. Connect Spray Hose: Connect the extendable spray hose (1200 mm length) to the designated port on the faucet body.
6. טשעק פֿאַר ליקס: Slowly turn on the main water supply and check all connections for any signs of leakage. Tighten connections as needed.
7. טעסט אָפּעראַציע: Operate the faucet to ensure proper water flow and temperature control. Test the extendable spray head and its switch-over function.

5. אַפּערייטינג ינסטרוקטיאָנס

The Cornat FAB535 features a single lever handle for controlling water flow and temperature, a swivel spout, and an extendable spray head.

• וואַסער פלוס און טעמפּעראַטור: הייבט אויף דעם איין-הייבל הענטל צו פארגרעסערן דעם וואסער פלוס. באוועגט דעם הענטל לינקס פאר הייס וואסער און רעכטס פאר קאלט וואסער.
• סוויוואַל ספּאַוט: The faucet's spout can be rotated to direct water flow as needed within the sink area.
• Extendable Spray Head: Pull the spray head from the spout to extend it for greater reach. The spray head includes a switch-over function (2.1 inch) to change between different spray patterns. Push the spray head back into the spout when finished.

6. וישאַלט

רעגולערע רייניקונג און וישאַלט וועט ענשור די לאַנגלעבעדיקייט און אָפּטימאַל פאָרשטעלונג פון דיין קראַן.

• רייניקונג: Clean the chrome-plated surfaces with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome finishes. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• קאַרטראַדזשאַז פאַרבייַט: The faucet features an easily replaceable, KTW approved cartridge with durable ceramic sealing discs. If you experience persistent drips or difficulty controlling water temperature, the cartridge may need replacement. Consult a professional if unsure.
• Sieve Flow Regulator: The M 24 x 1 sieve flow regulator (Made in Germany) can be removed and cleaned periodically to maintain optimal water flow.

7. טראָובלעשאָאָטינג

אויב איר טרעפט פּראָבלעמען מיט אייער קראַן, זעט די פאלגענדע געוויינטלעכע פּראָבלעמען און לייזונגען:

• נידעריק וואַסער לויפן: Check if the sieve flow regulator is clogged. Clean or replace it if necessary. Ensure water supply valves are fully open.
• רינען פון שפּאַץ: This often indicates a worn-out cartridge. The KTW approved ceramic cartridge is replaceable.
• ליקינג פון קאַנעקשאַנז: Ensure all hose connections are securely tightened. If leaks persist, check the condition of washers and seals.
• קיין הייס/קאלט וואסער: Verify that the hot/cold water supply is active and that the low-pressure accumulator is functioning correctly.

For problems not listed here or if solutions do not resolve the issue, contact customer support or a qualified plumber.

8. ספּעסאַפאַקיישאַנז

9. וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Cornat customer service. Keep your proof of purchase for warranty claims.