AUNE T1SE USB DAC Headphone Tube Ampליפיער ינסטרוקטיאָן מאַנואַל

1. הקדמה

The AUNE T1SE is a high-fidelity USB Digital-to-Analog Converter (DAC) and headphone amplifier featuring a tube buffer stage. It is designed to enhance your audio experience by providing superior sound quality from various digital sources. This device supports multiple audio formats, including 24-bit/192kHz PCM and DSD64, utilizing an XMOS USB interface and a DSD1793 DAC chip. The integrated Russian EH6922 tube acts as a buffer, adding a characteristic warmth to the audio output.

The T1SE can connect to a PC, Mac, or Android mobile phone (with OTG support) to form a compact audio system. It can drive HiFi headphones or connect to active speakers. Additionally, it features a LINE IN port, allowing it to function as a standalone amplifier for external analog sources.

2. פּעקל אינהאַלט

ביטע באַשטעטיקן אַז אַלע זאכן וואָס זענען ליסטעד אונטן זענען אַרייַנגערעכנט אין דיין פּעקל:

• AUNE T1SE Unit (1)
• מאַכט אַדאַפּטער (1)
• וסב קאַבלע (1)
• 6.5mm to 3.5mm Stereo F Adapter (1)
• באַניצער מאַנואַל (1)

Figure 2.1: Included accessories: manual, USB cable, and 6.5mm to 3.5mm adapter.

Figure 2.2: The dedicated power adapter for the AUNE T1SE.

3. פּראָדוקט איבערview

3.1 פראָנט פּאַנעל

פיגורע 3.1: פראָנט view of the AUNE T1SE unit.

פיגורע 3.2: דעטאַילעד view פון די פראָנט פּאַנעל קאָנטראָלס.

• רער: The visible vacuum tube (EH6922) acts as a buffer stage.
• אַרייַנשרייַב סעלעקטאָר באַשטימען: Toggles between USB input and LINE IN (analog) input.
• באַנד קנעפּל: Controls the output volume for both headphone and line outputs. Rotate clockwise to increase volume, counter-clockwise to decrease.
• כעדפאָון אַרויסגאַנג (6.5 מם): פאַרבינדן דיין כעדפאָונז דאָ.

3.2 דערציען פּאַנעל

פיגורע 3.3: דערציען view of the AUNE T1SE unit.

פיגורע 3.4: דעטאַילעד view פון די הינטערשטע פּאַנעל קאַנעקשאַנז.

• מאַכט אין: פֿאַרבינדט דאָ דעם צוגעשטעלטן מאַכט אַדאַפּטער.
• אויף/אַוועק באַשטימען: מאַכט קנעפּל פֿאַר די אַפּאַראַט.
• וסב ינפּוט: Connect to your computer or compatible Android device using the supplied USB cable for digital audio input.
• AUDIO IN (RCA L/R): Analog line input for connecting external audio sources (e.g., CD player, turntable with pre-amp).
• אַודיאָ אַרויס (RCA L/R): Analog line output for connecting to active speakers or a separate power ampליפער.
• סיריאַל נומער: Unique identifier for your unit. For more information, visit www.auneaudio.com.

4. סעטאַפּ

Follow these steps to set up your AUNE T1SE:

1. מאַכט קשר: Ensure the ON/OFF switch on the rear panel is in the OFF position. Connect the provided power adapter to the POWER IN port on the rear panel, then plug the adapter into a suitable wall outlet.
2. אַודיאָ אַרייַנשרייַב קאַנעקשאַן:
   • For USB DAC Function: Connect one end of the supplied USB cable to the USB Input port on the T1SE and the other end to a USB port on your computer (PC/Mac) or compatible Android device.
   • For Analog Input (Standalone Ampליבער): Connect your analog audio source (e.g., CD player) to the AUDIO IN (RCA L/R) ports on the rear panel using appropriate RCA cables.
3. אַודיאָ רעזולטאַט קאַנעקשאַן:
   • כעדפאָונז: Plug your headphones into the 6.5mm headphone output jack on the front panel. If your headphones have a 3.5mm plug, use the provided 6.5mm to 3.5mm adapter.
   • שורה אָוט: Connect the AUDIO OUT (RCA L/R) ports on the rear panel to your active speakers or a separate power ampליפיער ניצן RCA קייבאַלז.
4. ערשט מאַכט אויף: Turn the volume knob on the front panel to its minimum (MIN) position. Flip the ON/OFF switch on the rear panel to the ON position. The unit will remain muted for approximately 30 seconds to allow the tube to warm up. A white LED under the tube will illuminate once it is ready.

5. אַפּערייטינג ינסטרוקטיאָנס

Once the T1SE is set up and powered on, follow these instructions for operation:

1. אויסקלייַבן אַרייַנשרייַב מקור: Use the Input Selector Switch on the front panel to choose between 'USB' for digital audio from your computer/device or 'LINE' for analog audio from the RCA inputs.
2. סטרויערן באַנד: Slowly rotate the Volume Knob clockwise to increase the audio output to your desired listening level. Always start at a low volume to prevent sudden loud sounds.
3. פּלייבאַק: Begin playing audio from your selected source. For USB input, ensure your computer's audio output is set to the AUNE T1SE.
4. מאַכט אַוועק: When finished, turn the volume knob to the minimum position, then flip the ON/OFF switch on the rear panel to the OFF position.

6. ספּעסאַפאַקיישאַנז

Detailed technical specifications for the AUNE T1SE:

7. טראָובלעשאָאָטינג

If you encounter issues with your AUNE T1SE, please refer to the following common problems and solutions:

• קיין סאָונד רעזולטאַט:
  • Ensure the unit is powered on and the tube has warmed up (white LED illuminated).
  • Check all cable connections (power, USB, audio in/out, headphones).
  • Verify the Input Selector Switch is set to the correct source (USB or LINE).
  • Adjust the Volume Knob; ensure it is not at the minimum position.
  • For USB input, confirm that the AUNE T1SE is selected as the default audio output device in your computer's sound settings.
  • If using LINE IN, ensure the external audio source is playing and its volume is adequate.
• פאַרקרימט אָדער נעבעך געזונט קוואַליטעט:
  • קוק פֿאַר פרייַ קאַנעקשאַנז אָדער דאַמידזשד קייבאַלז.
  • זיכער מאַכן אַז די אַודיאָ מקור איז פון גוטער קוואַליטעט.
  • Reduce the volume if the sound is clipping or overdriven.
  • If using USB, try a different USB port or cable.
  • Ensure the tube is properly seated.
• איבערהיצונג פון דער איינהייט:
  • Ensure the unit has adequate ventilation and is not placed in an enclosed space.
  • If the unit becomes excessively hot or emits unusual odors, immediately power it off and disconnect from the power source. Contact customer support.
• אריינמישונג/גערויש:
  • Keep the unit away from other electronic devices that may cause interference (e.g., mobile phones, Wi-Fi routers).
  • זיכער מאַכן אַז די מאַכט קאַבלען לויפן נישט פּאַראַלעל צו אַודיאָ קאַבלען.

8. וישאַלט

Proper care and maintenance will ensure the longevity and optimal performance of your AUNE T1SE:

• רייניקונג: Use a soft, dry cloth to clean the exterior of the unit. Avoid using liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.
• אָרט: Place the unit on a stable, flat surface with good ventilation. Avoid direct sunlight, heat sources, and areas with high humidity or dust.
• רער פאַרבייַט: The EH6922 vacuum tube has a finite lifespan. If you notice a significant degradation in sound quality or the tube fails, it may need replacement. Ensure the unit is powered off and unplugged before attempting to replace the tube. Handle the tube carefully, as it is fragile. Consult a qualified technician if you are unsure.
• מאַכט צושטעלן: Always use the original power adapter supplied with the unit. Using an incorrect power supply can damage the device and void the warranty.

9. וואָראַנטי און שטיצן

For warranty information, technical support, or service inquiries, please contact your retailer or visit the official AUNE webזייטל. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן פֿאַר וואָראַנטי קליימז.

באַאַמטער Webפּלאַץ: www.auneaudio.com