The D-Link GO-SW-8G is an 8-port unmanaged Gigabit desktop switch designed for small office and home office (SOHO) environments. This device facilitates network expansion by providing eight 10/100/1000 Mbps Ethernet ports, enabling high-speed data transfer for connected devices. It incorporates D-Link's Green Technology for energy efficiency, reduced heat generation, and extended product lifespan.
סעטאַפּ
פּעקל אינהאַלט
באַשטעטיקן אַז דיין פּעקל כּולל די פאלגענדע זאכן:
GO-SW-8G device
מאַכט אַדאַפּטער
קאַנעקטינג די סוויטש
The GO-SW-8G is a plug-and-play device, requiring no software configuration for basic operation. Follow these steps to set up your switch:
מאַכט קשר: Connect the provided power adapter to the power input port on the rear panel of the GO-SW-8G switch and then plug the adapter into a standard electrical outlet.
נעץ מיטל פֿאַרבינדונג: Connect Ethernet cables from your network devices (e.g., computers, network-attached storage, routers) to any of the eight available RJ45 ports on the GO-SW-8G switch. The switch supports auto MDI/MDIX, so you can use either straight-through or crossover Ethernet cables.
וועראַפאַקיישאַן: Once connected, the corresponding LED indicator for each active port will illuminate, indicating a successful link.
Image: D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch. This image displays the compact white design of the switch with its multiple Ethernet ports and power input.
אַפּערייטינג
The D-Link GO-SW-8G operates as an unmanaged switch, meaning it requires no user configuration for its core functions. It automatically detects network speed and duplex mode for each connected device, providing optimal performance. The Gigabit Ethernet ports support data transfer rates of up to 1000 Mbps, facilitating fast communication within your local network.
געפירט ינדיקאַטאָרס
The switch features LED indicators for each port and for power. These indicators provide visual feedback on the status of the switch and its connections:
Power LED: לייכט זיך ווען דער קנעפּל איז אנגעצינדן.
לינק/אַקטיוויטעט LEDs (פּער פּאָרט):
שטאַרק גרין: Indicates a successful network link at Gigabit speed (1000 Mbps).
האַרט בורשטין: Indicates a successful network link at Fast Ethernet speed (10/100 Mbps).
פלאַשינג: Indicates network activity (data transmission or reception) on that port.
אויסגעלאשן: No link detected or device is not powered on/connected.
וישאַלט
To ensure optimal performance and longevity of your D-Link GO-SW-8G switch, follow these general maintenance guidelines:
אָרט: Place the switch in a well-ventilated area to prevent overheating. Avoid direct sunlight and heat sources.
רייניקונג: ניצט אַ ווייכע, טרוקענע שטאָף צו רייניקן די אויסערלעכע זייט פון דעם סוויטש. ניצט נישט קיין פליסיקע אדער אַעראָזאָל רייניגער.
קאַבלע פאַרוואַלטונג: Ensure network cables are neatly organized and not excessively bent or strained.
מאַכט צושטעלן: ניצן בלויז די מאַכט אַדאַפּטער סאַפּלייד מיט די מיטל.
טראָובלעשאָאָטינג
If you encounter issues with your D-Link GO-SW-8G switch, refer to the following common troubleshooting steps:
Ensure the switch is placed in an area with adequate ventilation to prevent performance degradation due to overheating.
ספּעסאַפאַקיישאַנז
סאָרט
ד-לינק
מאָדעל נומער
GO-SW-8G/B
נומער פון פּאָרץ
8
דאַטאַ אַריבערפירן קורס
1000 Megabytes Per Second (Gigabit)
באַשטימען טיפּ
אַנמאַנידזשד
צובינד
RJ45
קאַמפּאַטאַבאַל דעוויסעס
פּיסי, מעק
Voltage
5 וואלטס
Case Material Type
פּלאַסטיק
פּונקט וואָג
0.3 פונט
וואָראַנטי אינפֿאָרמאַציע
The D-Link GO-SW-8G switch comes with a 3-יאָר לימיטעד וואָראַנטי. For detailed terms and conditions, please refer to the warranty card included with your product or visit the official D-Link webפּלאַץ.
שטיצן
For technical support, product registration, or to download the latest firmware and documentation, please visit the official D-Link support website. You can typically find support resources by searching for your product model (GO-SW-8G) on their site.
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
