RAB Lighting FFLED39 Future Flood LED Light User Manual

1. פּראָדוקט איבערview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

שליסל פֿעיִקייטן:

• מאַכט: 39-וואט LED
• קאָליר טעמפּעראַטור: 5100K קיל ווייַס
• לעבן: 100,000 hours based on LM-80 tests
• LEDs: Three multi-chip 13-watt high-performance LEDs
• אָפּטיקס: NEMA type 7H x 6V with Air-flow technology heatsink
• רעפלעקטאר: Semi-specular anodized aluminum
• גאַסקעץ: הויך-טעמפּעראַטור סיליקאָנע
• ענדיקן: Bronze chip and fade-resistant polyester powder coat
• Voltage: 120-volt to 277-volt operation

2. זיכערקייַט אינפֿאָרמאַציע

Read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

• עלעקטריקאַל זיכערקייַט: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
• גראָונדינג: The fixture must be properly grounded to prevent potential electric shock.
• מאָונטינג: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
• אַפּערייטינג טעמפּעראַטור: Do not operate the fixture outside its specified temperature range.
• LEDs: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. ינסטאַלירונג

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

מכשירים פארלאנגט:

• שרויפנציהער (פיליפּס און פלאַכעד)
• ווירע סטריפּערז
• צוואַנג
• Drill (if mounting surface requires pilot holes)
• אַדזשאַסטאַבאַל מוטער-שליסל

מאַונטינג אָפּציעס:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

פיגורע 2: עקסample of a Slipfitter Mount (optional accessory)

ינסטאַלירונג סטעפּס:

1. דיסקאַנעקט מאַכט: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltagE tester.
2. צוגרייטן מאַונטינג ייבערפלאַך: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
3. דראָט קאַנעקשאַנז:
   • Connect the black wire from the fixture to the hot (L) wire from the power supply.
   • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
   • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
   • Use appropriate wire connectors and ensure all connections are secure.
4. Mount Fixture: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
5. סטרויערן ציל: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
6. ומקערן מאַכט: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. אָפּעראַציע

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

נאָרמאַל אָפּעראַציע:

• Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
• Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

פיגורע 3: עקסample of a Photocell (optional accessory)

5. וישאַלט

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

רייניקונג:

• עקסטעריע: רייניקן פּעריִאָדיש די אויסערלעכע זייט פון דער פֿיקסטשור מיט אַ ווייכן, דamp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents.
• לענס: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

דורכקוק:

• קאָנטראָלירט פּעריִאָדיש די פֿיקסטשור פֿאַר יעדע סימן פֿון שאָדן, לויזע פֿאַרבינדונגען אָדער טראָגן.
• Ensure all mounting hardware remains tight and secure.
• If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. טראָובלעשאָאָטינג

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. ספּעסאַפאַקיישאַנז

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

Figure 4: Indication of 100,000-hour LED lifespan

8. וואָראַנטי און שטיצן

פאַבריקאַנט ס וואָראַנטי:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1-יאָר פאַבריקאַנט ס וואָראַנטי פֿון דעם קויפֿדאַטום. די וואָראַנטי דעקט חסרונות אין מאַטעריאַלן און אַרבעט אונטער נאָרמאַלן באַנוץ און סערוויס.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

קונה שטיצן:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webזייטל פֿאַר איצטיקע קאָנטאַקט דעטאַלן.