Audio-Technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable

הקדמה

The Audio-Technica AT-LP60 is a fully automatic belt-drive stereo turntable designed for playing 33-1/3 and 45 RPM records. It features a built-in switchable phono pre-amplifier, allowing direct connection to various audio systems and powered speakers. The turntable is equipped with an integral Audio-Technica Dual Magnet phono cartridge with a replaceable stylus.

שליסל פֿעיִקייטן:

• Fully automatic operation for 33-1/3 and 45 RPM records.
• Built-in switchable phono pre-amplifier with RCA output cables.
• Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus.
• Anti-resonance die-cast aluminum platter to minimize vibration.
• Damped lift/cueing mechanism with front-panel control.
• Removable dust cover for protection.

פּעקל אינהאַלט

• AT-LP60 דריי-טיש אַפּאַראַט
• שטויב קאָווער
• טעלער מיט דרייוו גאַרטל
• צעטל מאַט
• 45 רפּם אַדאַפּטער
• רקאַ אַודיאָ קאַבלע
• מאַכט אַדאַפּטער

סעטאַפּ אינסטרוקציעס

1. אויספּאַקן: נעמט פֿאָרזיכטיק אַרויס אַלע קאָמפּאָנענטן פֿון דער פּאַקאַדזשינג. האַלט די פּאַקאַדזשינג פֿאַר צוקונפֿטיקן טראַנספּאָרט אָדער סטאָרידזש.
2. טעלער אינסטאַלאַציע: Place the platter onto the turntable spindle. Ensure it sits correctly.
3. גאַרטל ינסטאַלירונג: Locate the drive belt around the inner rim of the platter and stretch it over the motor pulley. Ensure the belt is flat and not twisted.
4. Slip Mat Placement: Place the felt slip mat on top of the platter.
5. שטויב דעקל אַטאַטשמענט: Attach the hinged dust cover to the back of the turntable.
6. אַודיאָ קאַנעקשאַן: Connect the RCA audio cables from the turntable to your audio system (receiver, amplifier, or powered speakers). If your audio system has a dedicated "PHONO" input, connect directly to it. If not, ensure the turntable's built-in pre-amplifier is switched ON (located on the rear panel) and connect to a standard "LINE" input.
7. מאַכט קשר: Connect the power adapter to the turntable and then to a wall outlet.

Image: Audio-Technica AT-LP60BK Turntable with dust cover open, showing a record on the platter. This image illustrates the turntable ready for use, with the dust cover raised and a record placed on the platter.

אַפּערייטינג ינסטראַקשאַנז

1. מאַכט אויף: Ensure the turntable is connected to power and your audio system is on.
2. אָרט רעקאָרד: Carefully place a vinyl record on the platter, centering it on the spindle. For 7-inch records, use the included 45 RPM adapter if needed.
3. אויסקלייבן רעקאָרד גרייס: Use the "SIZE" selector switch (usually 12" or 7") to match the size of your record.
4. אויסקלייַבן גיכקייַט: Use the "SPEED" selector switch (33 or 45 RPM) to match the playback speed of your record.
5. אָנהייבן ווידערשפּיל (אויטאָמאַטיש): דרוק די אָנהייב button. The tonearm will automatically move to the beginning of the record and lower the stylus.
6. אפשטעלן ווידערשפיל (אויטאמאטיש): דרוק די האַלטן קנעפּל. דער טאָנאַרם וועט זיך אויטאָמאַטיש הייבן, צוריקקומען צו זיין רו, און די טעלער וועט אויפהערן זיך דרייען.
7. Manual Cueing: To manually place the stylus, use the TONEARM LIFT lever to raise the tonearm. Position the tonearm over the desired track, then lower the lever to gently drop the stylus onto the record.

וישאַלט

• שטויב דעקל: Clean the dust cover gently with a soft, dry cloth. Avoid abrasive cleaners.
• סטילוס זאָרגן: Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Replace the stylus when sound quality degrades or after approximately 300-500 hours of use.
• דריי-טיש קערפער: Wipe the turntable body with a soft, dry cloth. Do not use harsh chemicals or solvents.
• גאַרטל פאַרבייַט: The drive belt may need replacement after extended use. Refer to the full manual for specific instructions on belt replacement.

טראָובלעשאָאָטינג

• קיין מאַכט: Ensure the power adapter is securely connected to both the turntable and a working electrical outlet.
• קיין געזונט אָדער נידעריק געזונט:
  • Check all audio cable connections between the turntable and your audio system.
  • Verify the PHONO/LINE switch on the turntable's rear panel is set correctly for your audio system's input.
  • Ensure your audio system's input selector is set to the correct input.
  • Check the volume level on your audio system.
• Skipping or Distorted Sound:
  • Clean the record thoroughly.
  • Check the stylus for dirt or damage; clean or replace if necessary.
  • זיכער מאַכן אַז דער דריי-טיש איז געשטעלט אויף אַ סטאַבילן, גלייכן ייבערפלאַך.
• Platter Not Spinning:
  • Check if the drive belt is properly seated around the platter and motor pulley.
  • Ensure the power is connected and the turntable is switched on.

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

The Audio-Technica AT-LP60 turntable comes with a 1 יאָר וואָראַנטי פֿון דעם קויף־דאַטום. ביטע באַהאַלטן אייער קויף־באַווייַז פֿאַר גאַראַנטיע־קליימז.

For technical support, troubleshooting assistance, or warranty service, please contact Audio-Technica customer support through their official webזייטל אדער די קאָנטאַקט אינפֿאָרמאַציע וואָס איז צוגעשטעלט אין אייער פּראָדוקט פּאַקאַדזשינג.

You can also visit the official Audio-Technica website for FAQs, additional resources, and product registration.