הקדמה
This manual provides instructions for the Dish Network 4.4 IR/UHF Pro Remote, model 176539. This remote is designed to operate Dish Network receivers, including the model 322, and can also be programmed to control up to three additional devices such as televisions, DVD players, VCRs, or sound systems. It supports both Infrared (IR) and Ultra High Frequency (UHF) communication modes.
This image displays the Dish Network 4.4 IR/UHF Pro Remote 322. The remote is black with various control buttons. Key features visible include the power button (orange), volume and channel controls (purple), a directional pad (purple), and number buttons (grey). The Dish Network logo is visible at the bottom right, along with a '2' indicating its function for a second TV.
סעטאַפּ
1. באַטאַרייע ייַנמאָנטירונג
The remote requires four (4) AAA batteries. To install:
- געפינט דעם דעקל פונעם באַטעריע־אָפּטייל אויף דער הינטערשטער זייט פונעם ווײַטקאָנטראָל.
- שלעפּט אַראָפּ דעם דעקל.
- Insert four AAA batteries, ensuring correct polarity (+ and -).
- פאַרבייַטן די דעקן פון די באַטאַרייע אָפּטייל.
2. Programming for Dish Network Receiver
This remote can operate in either IR (Infrared) or UHF (Ultra High Frequency) mode. The mode is typically selected via a switch or tab within the battery compartment or on the remote itself. For model 322 receivers, the remote can function as a primary remote (TV1) or a secondary remote (TV2) using either IR or UHF.
- IR מאָדע: Line-of-sight is required between the remote and the receiver.
- UHF Mode: Allows control without direct line-of-sight, useful for controlling receivers in another room or cabinet. The remote ships with a small UHF key for TV1.
Refer to your Dish Network receiver's manual for specific pairing instructions, as procedures may vary slightly by receiver model. Generally, this involves accessing a menu on your receiver to pair the remote.
3. Programming for Additional Devices (TV, DVD, VCR, Sound System)
The remote can be programmed to control up to four devices. To program for other devices:
- צינדט אָן דעם דעווייס וואָס איר ווילט פּראָגראַמירן (למשל, טעלעוויזיע, DVD שפּילער).
- Press and hold the desired device button (e.g., TV, ווי) on the remote until all device buttons light up, then release. The selected device button should remain lit.
- Enter the 3-digit programming code for your device's brand. A list of common codes is usually provided with the remote or can be found on the Dish Network support webפּלאַץ.
- ריכט דעם ווײַט־קעסטל אויפן אַפּאַראַט און דריק אויף דעם קנעפּל מאַכט button. If the device turns off, the code is correct.
- If the device does not turn off, repeat steps 2-4 with the next code for your brand.
- Once programmed, press the selected device button again to save the setting.
אַפּערייטינג די רימאָוט
The Dish Network 4.4 remote features a variety of buttons for controlling your entertainment system. Below are descriptions of common button functions:
- מאַכט: טוט אן אדער אויסלעשן דעם אויסגעקליבענעם אפאראט.
- טעלעוויזיע / ווידעא: Switches video input on your television.
- שטיל: שטיל די אַודיאָ.
- VOLUME +/-: אַדזשאַסץ די אַודיאָ באַנד.
- CHANNEL +/-: ענדערונגען דעם קאַנאַל.
- גייד: דיספּלייז די פּראָגראַם פירער.
- אינפֿאָרמאַציע: דיספּלייז אינפֿאָרמאַציע וועגן דעם קראַנט פּראָגראַם.
- צוריקרופן: קערט צו דעם פריערדיקן קאַנאַל.
- SYS INFO: Accesses system information.
- DIRECTIONAL PAD (Arrows & SELECT): נאַוויגירט מעניוז און סעלעקטירט אָפּציעס.
- באָטל מאַכן: Exits menus or cancels actions.
- VIEW טעלעוויזיע: Switches to live television.
- רעקאָרד: הייבט אן אויפנאמע פון דער איצטיקער פראגראם.
- DVR Controls (PLAY, PAUSE, STOP, FWD, REW, SKIP): Controls playback of recorded content.
- נומער קנעפּלעך (0-9): Directly enters channel numbers or menu selections.
- זוכן: Accesses search functions.
- פאָרמאַט: Changes video format or aspect ratio.
וישאַלט
באַטערי פאַרבייַט
Replace batteries when the remote's response becomes sluggish or the indicator light fails to illuminate. Always replace all four AAA batteries simultaneously with new ones. Do not mix old and new batteries or different battery types.
רייניקונג
To clean the remote, use a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the remote's electronics or finish.
טראָובלעשאָאָטינג
- ווייַט ניט ריספּאַנדינג:
- קאָנטראָלירט די באַטעריע אינסטאַלאַציע און זיכערט זיך אַז די באַטעריעס זענען פריש.
- Ensure there are no obstructions between the remote and the receiver/device if using IR mode.
- Verify the remote is set to the correct device mode (e.g., SAT for the receiver, TV for the television).
- ספעציפישע קנעפּלעך ארבעטן נישט:
- This may indicate a worn-out button or internal issue. Try replacing batteries first.
- If the remote is programmed for multiple devices, ensure the correct device button is selected for the function you are attempting.
- Programming issues for other devices:
- Double-check the programming codes for your device brand.
- Ensure the device is on and the remote is pointed directly at it during programming.
- Some older or newer devices may not be compatible with the remote's pre-programmed codes.
- UHF mode not working:
- Ensure the remote's UHF switch/tab is correctly set.
- Verify the receiver is configured for UHF remote control and is properly paired.
ספּעסאַפאַקיישאַנז
- מאָדעל נומער: 176539
- פּראָדוקט דימענשאַנז: 8 X 1 X 3 אינטשעס
- נומער וואָג: 3.52 אונסעס
- באַטעריז: 4 אַאַאַ באַטעריז פארלאנגט
- מאַקסימום נומער פון שטיצט דעוויסעס: 4
- קאַמפּאַטאַבאַל דעוויסעס: Dish Network Satellite Receivers (e.g., Model 322), TV, DVD, VCR, Sound Systems
- קאָמוניקאַציע טיפּ: IR (Infrared) and UHF (Ultra High Frequency)
- קאָליר: שוואַרץ
וואָראַנטי און שטיצן
For specific warranty information or technical support, please contact Dish Network directly. Their official website or customer service channels can provide the most accurate and up-to-date assistance regarding your remote control and receiver.