Ingersoll Rand 2015MAX 3/8-inch Pneumatic Right Angle Impact Wrench User Manual

הקדמה

This manual provides essential information for the safe and efficient use of your Ingersoll Rand 2015MAX 3/8-inch Pneumatic Right Angle Impact Wrench. Please read these instructions thoroughly before operating the tool to ensure proper function and to prevent injury or damage.

The 2015MAX is designed for applications requiring the power of an impact wrench with the accessibility of a ratchet, featuring a low-profile head for tight spaces.

שליסל פֿעיִקייטן

• Compact Accessibility: Head height under 2 inches for access in confined areas, offering reach similar to a standard ratchet.
• שטאַרק פאָרשטעלונג: Delivers up to 180 ft-lb of torque output with a finely tuned vane motor and power regulation for controlled operation.
• שנעלע סאָקעט ענדערונגען: Equipped with a square socket retaining ring anvil for easy and efficient socket attachment and removal.
• באַניצער-פרייַנדלעך אָפּעראַציע: Features a feather-touch trigger, a two-position forward power regulator, a forward/reverse ring, and an ergonomically designed rear exhaust system for comfort and control.
• דוראַבאַל קאַנסטראַקשאַן: Built with a composite housing and Ingersoll Rand manufactured components, rigorously tested for long-lasting performance in demanding environments.

סעטאַפּ

1. לופט צושטעלן קאַנעקשאַן:

   Connect the tool to a clean, dry, regulated air supply. Ensure the air hose has an inside diameter of at least 3/8 inch for optimal performance. The recommended operating air pressure is 90 psi (6.2 bar) at the tool inlet while the trigger is pressed.
2. שמירן:

   Before first use and regularly thereafter, apply a few drops of pneumatic tool oil into the air inlet. This lubricates the internal components and extends tool life.

3. סאָקקעט אַטאַטשמאַנט:

   Select the appropriate 3/8-inch impact-rated socket. Push the socket firmly onto the square drive anvil until it locks into place with the retaining ring. Ensure the socket is securely seated before operation.

   

אַפּערייטינג ינסטראַקשאַנז

1. מאַכט רעגולאַציע:

   The tool features a two-position forward power regulator. Adjust this regulator to control the torque output for tightening applications. Position 1 provides lower torque, and Position 2 provides maximum torque (up to 180 ft-lbs).

2. פאָרויס/צוריק קאָנטראָל:

   Utilize the forward/reverse ring located near the trigger to switch between tightening (forward) and loosening (reverse) modes. Ensure the direction is set correctly before operating.
3. טריגער אָפּעראַציע:

   Press the feather-touch trigger to activate the tool. Apply steady pressure. Release the trigger to stop operation. Avoid prolonged operation against a fully tightened or seized fastener to prevent tool damage.

4. ארבעטן אין ענגע פלעצער:

   די נידעריק-פּראָfile right-angle head is specifically designed for enhanced access to hard-to-reach nuts and bolts. Position the tool head carefully to engage the fastener squarely.

   

וישאַלט

• טעגלעכע לובריקאציע: Apply 5-10 drops of Ingersoll Rand air tool oil (or equivalent) into the air inlet before each use and after every hour of continuous operation.
• Air Line Filter: Ensure your air supply system includes an air line filter to prevent moisture and debris from entering the tool. Regularly drain water from the air compressor tank and air line filters.
• רייניקונג: Keep the tool clean and free from dirt and debris. Use a soft cloth to wipe down the exterior. Avoid using harsh solvents that could damage the composite housing.
• סטאָרידזש: Store the tool in a clean, dry environment when not in use. Disconnect it from the air supply.
• דורכקוק: Periodically inspect the tool for any signs of wear or damage, especially the drive anvil and housing. Do not operate a damaged tool.

טראָובלעשאָאָטינג

ספּעסאַפאַקיישאַנז

וואָראַנטי און שטיצן

Ingersoll Rand products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Ingersoll Rand website. In case of technical issues, repairs, or parts inquiries, please contact an authorized Ingersoll Rand service center or customer support.

איר קענט געפֿינען מער אינפֿאָרמאַציע און שטיצע רעסורסן אויף דער Ingersoll Rand Store on Amazon.