פּראָדוקט איבערview
The SEM Color Coat is a specialized elastomeric coating designed to restore or change the color of various surfaces, including most vinyl, flexible and rigid plastics, carpet, and velour. This product is formulated as a fade-resistant, flexible, and permanent coating, not a dye.
בילד: פראָנט view of the SEM Color Coat aerosol can, showing the product name, "Flexible Coating," and a graphic of a car interior.
זיכערקייַט אינפֿאָרמאַציע
DANGER! EXTREMELY FLAMMABLE AEROSOL.
Causes skin irritation. Causes serious eye irritation. Harmful or fatal if swallowed. Vapor harmful. Read cautions on back panel.
- האַלטן אַוועק פון היץ / ספּאַרקס / עפענען פלאַמעס / הייס סערפאַסיז. ניט סמאָוקינג.
- פּרעשערייזד קאַנטיינער: דו זאלסט נישט דורכשטעכן אָדער פאַרברענען, אפילו נאָך נוצן.
- דו זאלסט נישט שפּריץ אויף אַ עפענען פלאַם אָדער אנדערע יגנישאַן מקור.
- Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
- אַוועקוואַרפן אינהאַלט / קאַנטיינער אין לויט מיט היגע / רעגיאָנאַל / נאציאנאלע / אינטערנאציאנאלע רעגיאַליישאַנז.
- ויסמיידן ברידינג שטויב / רויך / גאַז / נעפּל / פארע / שפּריץ.
- וואַשן ונ דורך נאָך האַנדלינג.
- טראָגן פּראַטעקטיוו גלאַווז / אויג שוץ / פּנים שוץ.
- IF ON SKIN: Wash with plenty of water and soap. If skin irritation occurs, get medical advice/attention.
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
- IF SWALLOWED: Immediately call a POISON CENTER/doctor. Do NOT induce vomiting.
- IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell.
בילד: צוריק view of the SEM Color Coat aerosol can, displaying safety warnings and product information.
סעטאַפּ און צוגרייטונג
Proper preparation is crucial for optimal adhesion and longevity of the coating. Follow these steps carefully:
- אַראָפּנעמען פּאַרץ: Disassemble and remove the parts you intend to paint from the vehicle or item.
- גרונטיק רייניקונג: Thoroughly clean the surfaces with soap and a degreaser to remove all dirt, grease, and contaminants.
- Light Sanding (Optional but Recommended): For improved adhesion, lightly sand the surface with 800-grit sandpaper.
- לעצט רייניקונג: Clean the surface thoroughly again with acetone. This step is very important for proper adhesion. Wear rubber gloves and safety goggles during this step as acetone can burn through gloves and is irritating to eyes.
- טעמפּעראַטור: Ensure the application temperature is approximately 21°C (70°F).
בילד: זייט view of the SEM Color Coat aerosol can, showing general application instructions and product details.
אפערירן אינסטרוקציעס (אַפּליקאַציע)
Apply the SEM Color Coat in multiple thin layers, allowing adequate drying time between coats. Do not use a heat gun.
- First Coat (Light Dusting): Apply a very light dusting coat. Alternatively, apply an adhesion promoter if desired, which can help the paint adhere better to surfaces.
- Second Coat (Light Dusting): Apply another light dusting coat.
- Subsequent Coats (Coverage): Apply a third coat with more coverage, followed by a fourth and fifth coat for complete and even coverage.
- דרייינג צייט: Allow 10-15 minutes in between coats. The exact drying time may vary depending on the ambient temperature.
The product is designed to be fast-drying, with a dry time of approximately 1 hour.
בילד: אויבן view of the SEM Color Coat aerosol can, displaying the model number "15813" and color "Medium Dark Pewter" on the cap.
וישאַלט
Once applied and fully cured, SEM Color Coat provides a durable and flexible finish. To maintain the appearance and longevity of the coating:
- Clean coated surfaces with mild automotive interior cleaners.
- Avoid harsh abrasives or strong chemical solvents that could damage the finish.
- While the product is designed to be permanent and fade-resistant, prolonged exposure to extreme conditions may affect its lifespan.
טראָובלעשאָאָטינג
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Poor Adhesion / Chipping | Inadequate surface preparation (e.g., not cleaned thoroughly, no sanding). | Ensure surfaces are meticulously cleaned with degreaser and acetone. Consider light sanding. Apply an adhesion promoter. |
| Uneven Color / Streaks | Too thick coats, insufficient shaking of can, or inconsistent spray pattern. | Apply multiple thin, even coats. Shake can well before and during use. Maintain consistent distance from surface. |
| קאָליר מיסמאַטש | Incorrect color selection for the original surface. | Verify the correct color code for your application. Test on an inconspicuous area first. Note that "Medium Dark Pewter" may vary slightly depending on the original surface's specific shade. |
ספּעסאַפאַקיישאַנז
- סאָרט: SEM
- מאָדעל נאָמען: 15813
- קאָליר: Medium Dark Pewter (Color Code: #665D56)
- ענדיקן טיפּ: מעטאַלליק
- נומער באַנד: 12 Fluid Ounces (12 oz / 340 g)
- נומער פאָרעם: אַעראָסאָל
- פּיינט טיפּ: Specialty Elastomeric Coating
- ספּעציפיש ניצט: Vinyl surfaces, flexible and rigid plastics, carpet, velour
- ייבערפלאַך רעקאָמענדאַציע: Carpet (also suitable for vinyl, plastic, velour)
- דרינענדיק / דרויסנדיק באַניץ: דרינענדיק, דרויסנדיק
- ספּעציעלע שטריך: שנעל-דריינג
- טרוקן צייט: בעערעך 1 שעה
- וואַסער קעגנשטעל מדרגה: ניט וואַסער קעגנשטעליק
- נומער וואָג: 1 פונט
- פּראָדוקט דימענשאַנז: 8.38 X 5.63 X 7.88 אינטשעס
- UPC: 646786158131
נאָך רעסורסן
For more detailed technical data and information, refer to the official SEM Color Coat Technical Data Sheet or RAP-1.
A relevant link for additional information can be found here: SEM Color Coat Technical Data
וואָראַנטי און שטיצן
Information regarding product warranty and direct support contacts is not available in this manual. Please refer to the product packaging or the manufacturer's official website for warranty details and customer support options.