On-Q PW7760

Legrand On-Q PW7760 12VDC 18W Power Supply Instruction Manual

מאָדעל: PW7760

1. הקדמה

This manual provides instructions for the safe and efficient use of your Legrand On-Q PW7760 12VDC 18W Power Supply. This power supply is designed to provide reliable 12V DC power for various data networking and video products within a structured wiring enclosure. Please read this manual thoroughly before installation and operation.

2. זיכערקייַט אינפֿאָרמאַציע

WARNING: Risk of Electric Shock. Do not open the unit. Refer all servicing to qualified personnel.

  • Ensure the power supply is disconnected from the main power source before performing any installation, maintenance, or troubleshooting.
  • שטעלט נישט אויס דעם אַפּאַראַט צו פייכטקייט אָדער עקסטרעמע טעמפּעראַטורן.
  • דער פּראָדוקט איז דיזיינד בלויז פֿאַר דרינענדיק נוצן.
  • Use only with compatible devices requiring 12V DC input.
  • פאַרזיכערן געהעריק ווענאַליישאַן אַרום די אַפּאַראַט צו פאַרמייַדן אָוווערכיטינג.
  • The power supply is UL listed, indicating compliance with safety standards.

3. פּעקל אינהאַלט

באַשטעטיקן אַז אַלע זאכן זענען פאַראַן אין דיין פּעקל:

  • Legrand On-Q PW7760 12VDC 18W Power Supply (1 unit)
  • ינסטרוקטיאָן מאַנואַל (דעם דאָקומענט)

4. סעטאַפּ און ייַנמאָנטירונג

The PW7760 power supply is designed for wall mounting, typically within a structured wiring enclosure. Follow these steps for proper installation:

  1. Mounting the Power Supply: The unit features a design suitable for wall mounting. Secure the power supply within your structured wiring enclosure using appropriate fasteners (not included) through the designated mounting points. Ensure it is firmly attached to prevent accidental dislodgement.
  2. פֿאַרבינדן צו AC מאַכט: Plug the power supply's AC input cord into a standard 120V AC wall outlet or a power strip within the enclosure. Ensure the outlet is easily accessible and not overloaded.
  3. קאַנעקטינג דעוויסעס: Connect the DC output barrel connector of the PW7760 power supply to the 12V DC input port of the device you intend to power (e.g., network switch, video module). Verify that the device requires 12V DC and does not exceed the power supply's 18W (1.5A) capacity.
Legrand On-Q Power Supply installed in a structured wiring enclosure, powering network components.
פיגורע 1: עקסample installation of the Legrand On-Q Power Supply within a structured wiring enclosure, providing power to various network modules.
Close-up of the Legrand On-Q Power Strip Module with a red power switch.
Figure 2: The Legrand On-Q Power Supply (PW7760) module, featuring its power input and output connections.

5. אַפּערייטינג ינסטרוקטיאָנס

Once the power supply is correctly installed and connected to your devices:

  • מאַכט אויף: If the power supply has an integrated switch, toggle it to the 'ON' position. Otherwise, ensure the wall outlet or power strip it is connected to is active.
  • באַשטעטיקן אָפּעראַציע: Check the connected devices for power indicators to confirm they are receiving power.
  • מאַכט אַוועק: To disconnect power, either toggle the integrated switch to 'OFF' or unplug the power supply from the AC outlet.

6. וישאַלט

The Legrand On-Q PW7760 Power Supply requires minimal maintenance:

  • רייניקונג: Disconnect the power supply from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
  • דורכקוק: Periodically inspect the power cords and connectors for any signs of damage, fraying, or loose connections. Replace any damaged components immediately.
  • ווענטילאַטיאָן: Ensure that the area around the power supply remains clear of obstructions to allow for proper airflow and prevent overheating.

7. טראָובלעשאָאָטינג

אויב איר טרעפט פּראָבלעמען מיט אייער מאַכט צושטעלן, זעט די פאלגענדע געוויינטלעכע פּראָבלעמען און לייזונגען:

פּראָבלעםמעגלעך סיבהלייזונג
קיין מאַכט צו קאָננעקטעד דעוויסעסPower supply not plugged in or AC outlet is off.Ensure the power supply is securely plugged into a live AC outlet. Check the outlet with another device.
קיין מאַכט צו קאָננעקטעד דעוויסעסPower supply switch is off.If applicable, ensure the power supply's integrated switch is in the 'ON' position.
קיין מאַכט צו קאָננעקטעד דעוויסעסDC output cable is loose or damaged.Verify the DC barrel connector is firmly seated in the device's input. Inspect the cable for damage.
Connected device malfunctions or restartsDevice requires more power than 18W.Confirm the power requirements of your device. This power supply provides 12VDC at 18W. Using it with higher-power devices may cause instability or damage.
Power supply feels excessively hotPoor ventilation or overloaded.Ensure adequate airflow around the unit. Disconnect some devices if multiple are connected and check if the temperature reduces.

8. ספּעסאַפאַקיישאַנז

שטריךדעטאַל
מאָדעל נומערפּווקסנומקס
פאַבריקאַנטLegrand On-Q
אַרייַנשרייַב וואָלtage120V AC (סטאַנדאַרד יו. עס.)
רעזולטאַט חלקtage12V DC
וואָסtage18 וואטס
Ampעראַגע0.4 Amps (Input), 1.5 Amps (רעזולטאַט)
דימענסיעס (L X W X H)3.15 X 1.97 X 1.3 אינטשעס
פּונקט וואָג6.4 אונסעס
מאַטעריאַלHigh Impact Flame Retardant Plastic
מאַונטינג טיפּוואנט בארג
ספּעציעלע פֿעיִקייטןקורץ קרייַז פּראַטעקשאַן
סערטיפיקאַטיאָנסUL ליסטעד

9. וואָראַנטי און שטיצן

For warranty information and technical support, please refer to the official Legrand On-Q webזייטל אדער קאנטאקט זייער קאסטומער סערוויס גלייך. האלט אייער קויף קוויטל אלס באווייז פון קויפן פאר גאראנטיע קליימס.

אָנליין רעסורסן: www.legarand.us/on-q

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.