Equip CEE 7/7 (SCHUKO) to C13 Power Cable Instruction Manual

1. פּראָדוקט איבערview

This manual provides essential information for the safe and proper use of your Equip CEE 7/7 (SCHUKO) to C13 Power Cable. This cable is designed to connect electronic devices requiring a C13 power input to a standard CEE 7/7 (SCHUKO) wall outlet.

Figure 1: Equip CEE 7/7 (SCHUKO) to C13 Power Cable. The image shows the male CEE 7/7 (Schuko) plug with two round pins and grounding clips, and the female C13 connector, commonly used for computers and monitors.

שליסל פֿעיִקייטן:

• C13 socket x 1
• 1 x Schuko (CEE 7/7) plug
• Conductor: 0.75 mm² (24/0.19 mm)
• קאַבלע לענג: 1.1 עם

2. זיכערקייַט אינסטרוקציעס

Please read and understand these safety instructions before using the power cable. Failure to follow these instructions may result in electric shock, fire, or damage to equipment.

• ניצט נישט דעם קאַבל אויב עס איז געשעדיגט, אויפגעריסן, אדער האט אויפגעדעקטע דראָטן.
• פאַרזיכערן די וואָלtage and current ratings of the connected device are compatible with the power supply and cable.
• דו זאלסט נישט אָווערלאָאַד עלעקטריקאַל אַוטלעץ.
• Keep the cable away from water, heat sources, and sharp objects.
• Do not attempt to modify or repair the cable. Contact qualified personnel for assistance.
• Always grasp the plug, not the cable, when disconnecting from an outlet or device.

3. סעטאַפּ און קאַנעקשאַן

Follow these steps to properly connect your device using the Equip power cable:

1. דורכקוקן די קאַבלע: Before connecting, visually inspect the power cable for any signs of damage, such as cuts, abrasions, or bent pins. Do not use a damaged cable.
2. פאַרבינדן צו מיטל: Insert the C13 connector (female end) firmly into the corresponding C14 inlet on your electronic device (e.g., computer, monitor, printer). Ensure a snug fit.
3. פאַרבינדן צו מאַכט אָוטלעט: Insert the CEE 7/7 (SCHUKO) plug (male end) into a standard, grounded CEE 7/7 wall power outlet. Ensure the plug is fully inserted.
4. מאַכט אויף: Once both ends are securely connected, you may power on your device.

Figure 2: C13 Connector. This image shows the C13 female connector, which plugs into the C14 inlet of electronic devices.

4. אַפּערייטינג ינסטרוקטיאָנס

This power cable is designed for simple plug-and-play operation. Once connected as described in the "Setup and Connection" section, it provides power to your device.

• Ensure the cable is not kinked, pinched, or run under heavy objects that could damage it.
• Avoid pulling on the cable to disconnect it. Always use the molded plug to remove it from the outlet or device.
• Do not use the cable in wet or damp באדינגונגען.

5. וישאַלט און קער

Proper maintenance ensures the longevity and safe operation of your power cable.

• רייניקונג: Disconnect the cable from all power sources before cleaning. Wipe the cable and plugs with a dry, soft cloth. Do not use liquid cleaners or solvents.
• סטאָרידזש: When not in use, coil the cable loosely. Avoid tight coiling or bending, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• דורכקוק: Periodically inspect the cable for any signs of wear, damage, or discoloration. Replace the cable immediately if any damage is observed.

6. טראָובלעשאָאָטינג

If you encounter issues with your power cable, refer to the following common troubleshooting steps:

אויב די פראבלעם-פארהיטונג טריט לייזן נישט דעם פראבלעם, שטעלט אפ דעם באנוץ און קאנטאקטירט קאסטומער סופארט.

7. ספּעסאַפאַקיישאַנז

8. וואָראַנטי און שטיצן

For warranty information or technical support, please refer to the official Equip webזייטל אדער קאָנטאַקט אייער הענדלער. האַלט אייער קויף קוויטל ווי אַ באַווייַז פון קויפן.

פאַבריקאַנט: דיגיטאַל דאַטאַ קאָמוניקאַציע

סאָרט: יקוויפּ

קאָנטאַקט אינפֿאָרמאַציע: ביטע באַזוכן די Equip official webפּלאַץ for support and contact details.