Performance Tool W1611 2.25 Ton Trolley Jack Instruction Manual

הקדמה

This manual provides essential instructions for the safe operation, maintenance, and storage of your Performance Tool W1611 2.25 Ton (4,500 lbs) Capacity Trolley Jack. Before using the jack, it is crucial to read and understand all instructions and safety warnings to prevent injury or property damage. Keep this manual for future reference.

Image: The Performance Tool W1611 2.25 Ton Trolley Jack, a yellow hydraulic jack with a long handle.

וויכטיק סאַפעטי אינפֿאָרמאַציע

WARNING: Failure to heed these warnings may result in personal injury or property damage.

• לייענען אַלע אינסטרוקציעס: Understand the operation and limitations of the jack, as well as the hazards involved.
• ניצן אויף אַ שווערער, ​​גלייכער ייבערפלאַך: Always use the jack on a hard, level surface capable of supporting the load. Avoid soft ground or uneven surfaces.
• נישט איבערשטייגן די ראַטעד קאַפּאַציטעט: The W1611 jack has a maximum capacity of 2.25 tons (4,500 lbs). Do not attempt to lift loads heavier than this rating.
• ניצן דזשעק שטאַנדן: This jack is a lifting device only. Immediately after lifting, support the vehicle with appropriate jack stands. Never work under a vehicle supported only by a jack.
• צענטרירן די לאַסט: Ensure the load is centered on the jack saddle. Off-center loads can cause instability.
• האַלטן קלאָר: Keep hands, feet, and other body parts clear of moving parts and the area under the load.
• דורכקוקן איידער יעדער נוצן: Check the jack for any damage, leaks, or loose parts before each use. Do not use if damaged.
• נידעריגערן שטייטערהייט: שטענדיק לאָזט אַראָפּ די לאַסט לאַנגזאַם און אויף אַ קאָנטראָלירטן שטייגער.
• פאָרלייג 65 ווארענונג: דער פּראָדוקט קען אַנטהאַלטן קעמיקאַלז באקאנט צו די שטאַט פון קאַליפאָרניאַ צו פאַרשאַפן ראַק און געבורט חסרונות אָדער אנדערע רעפּראָדוקטיווע שאָדן. וואַשן הענט נאָך האַנדלינג.

פּעקל אינהאַלט

באַשטעטיקן אַז אַלע קאָמפּאָנענטן זענען פאַראַן ביים אויספּאַקן:

• 1 Performance Tool W1611 2.25 Ton Trolley Jack
• 1 Operating Handle
• 1 Blow-molded plastic storage case

ספּעסאַפאַקיישאַנז

בילד: נאָענט-אַרויף view highlighting the steel lifting saddle and the heavy-duty wheels of the trolley jack.

אויפשטעלן און ערשטע צוגרייטונג

1. ונפּאַקקינג

Carefully remove the trolley jack and its components from the packaging. Inspect for any shipping damage. If any damage is found, do not use the jack and contact customer support.

2. שעפּן אַסעמבלי

Insert the operating handle into the handle socket on the jack. Ensure it is securely seated. Some models may require tightening a set screw.

3. Bleeding the Hydraulic System

Before first use, or if the jack has been stored for an extended period, it is recommended to bleed any air from the hydraulic system to ensure proper operation. This procedure helps distribute fluid evenly through internal components.

1. Locate the release valve (typically a screw or knob near the handle socket).
2. Turn the release valve counter-clockwise to open it fully.
3. Pump the handle vigorously six (6) to ten (10) times. This action will cycle the hydraulic fluid and expel any trapped air.
4. דרייט דעם אויסלאָז־ווענטיל זייגערווייז צו עס פעסט פֿאַרמאַכן. דער דזשעק איז איצט גרייט פֿאַר באַנוץ.

אַפּערייטינג ינסטראַקשאַנז

1. Lifting a Vehicle

1. צוגרייטן די פאָרמיטל: Park the vehicle on a hard, level surface. Engage the parking brake and place the transmission in 'Park' (automatic) or 'Reverse' (manual). Block the wheels that will remain on the ground to prevent movement.
2. שטעלן די דזשאַק: Locate the manufacturer-recommended lifting points on your vehicle's frame or chassis. Position the jack so the saddle is directly under the lifting point. Ensure the jack is stable and the load is centered on the saddle.
3. כאַפּן די פאָרמיטל: Close the release valve by turning it clockwise until it is firm. Pump the operating handle up and down to raise the vehicle to the desired height.
4. זיכער מיט דזשעק שטאנדן: Once the vehicle is lifted, immediately place appropriately rated jack stands under the vehicle's designated support points. Slowly lower the vehicle onto the jack stands by gradually turning the release valve counter-clockwise. Ensure the vehicle is stable on the jack stands before performing any work.

2. אראפלאזן א פארמיטל

1. ויסמעקן די שטח: Ensure all tools, personnel, and obstructions are clear from under and around the vehicle.
2. אַ ביסל אויפהייבן: If the vehicle is on jack stands, pump the jack handle a few times to lift the vehicle slightly off the jack stands.
3. אַראָפּנעמען דזשעק סטאַנדז: פֿאָרזיכטיק אַראָפּנעמען די דזשעק שטאַנדן פֿון אונטערן פֿאָרמיטל.
4. נידעריגערן דאָס אויטאָ: Slowly turn the release valve counter-clockwise to gradually lower the vehicle to the ground. Once fully lowered, remove the jack.

Image: The Performance Tool W1611 trolley jack positioned for lifting, demonstrating its extended handle and low profile.

וישאַלט

Regular maintenance ensures the longevity and safe operation of your trolley jack.

• רייניקונג: Keep the jack clean and free of dirt, grease, and debris. Wipe down the exterior with a clean cloth after each use.
• שמירן: Periodically lubricate the pivot points, wheels, and especially the wheel castor bearings with light machine oil to ensure smooth operation and prevent rust.
• הידראַוליק פליסיק: Check the hydraulic fluid level periodically. If the fluid level is low, consult a qualified service technician for proper refilling with hydraulic jack oil. Do not use brake fluid or other non-specified fluids.
• דורכקוק: Regularly inspect the jack for any signs of wear, damage, or leaks. Pay close attention to welds, the hydraulic cylinder, and the handle. If any issues are found, discontinue use and have it repaired by a qualified professional.

טראָובלעשאָאָטינג

זעט די טאבעלע אונטן פאר אלגעמיינע פראבלעמען און זייערע מעגליכע לייזונגען.

סטאָרידזש

Proper storage helps maintain the jack's condition and readiness for use.

• רייניקן איידער סטאָרידזש: Ensure the jack is clean and dry before storing.
• Lower Ram Fully: Always lower the jack's ram completely before storage to relieve pressure on the hydraulic system.
• ניצן סטאָרידזש קעסטל: Store the jack in its provided blow-molded plastic case to protect it from dust, moisture, and damage. This also prevents it from rolling around if stored in a vehicle.
• קראָם אין אַ טרוקן אָרט: Store the jack in a dry, protected area, away from corrosive materials and extreme temperatures.

Image: The Performance Tool W1611 trolley jack alongside its durable black plastic storage case, emphasizing portability and protection.

וואָראַנטי און שטיצן

For warranty information or technical support regarding your Performance Tool W1611 2.25 Ton Trolley Jack, please refer to the documentation included with your purchase or visit the official Performance Tool webזייטל. קאָנטאַקט דעטאַלן פֿאַר קונה סערוויס זענען טיפּיש בנימצא אויף דער פאַבריקאַנט ס webזייטל אדער פּראָדוקט פּאַקאַדזשינג.

איר קענען באַזוכן די Performance Tool Store on Amazon פֿאַר מער פּראָדוקט אינפֿאָרמאַציע און שטיצע רעסורסן.