AudioQuest NRG-Y2 Power Cable User Manual

1. פּראָדוקט איבערview

The AudioQuest NRG-Y2 Power Cable is designed to deliver clean and stable power to various electronic devices, enhancing their performance. It features a 1-meter length with a C7 connector for the device end and a 3-prong wall plug for the power source. This cable incorporates advanced technologies to minimize noise and distortion, ensuring optimal signal transfer.

• Long Grain Copper: Minimizes distortion caused by grain boundaries within the conductor.
• Semi-Solid Concentric Conductors: Strands are tightly packed and maintain position, reducing strand-interaction distortion.
• Silver-Plated Drain Wires: Direction-controlled shield conductors efficiently drain RF noise to ground.
• Noise-Dissipation Technology: Reduces interference for quieter backgrounds.

Image 1.1: The AudioQuest NRG-Y2 Power Cable, showcasing its robust design and connectors.

2. סעטאַפּ אינסטרוקציעס

Follow these steps to properly connect your AudioQuest NRG-Y2 Power Cable:

1. ידענטיפיצירן קאַנעקטערז: Locate the C7 connector (two-pin, figure-8 shape) and the 3-prong wall plug.
2. פאַרבינדן צו מיטל: Insert the C7 connector firmly into the corresponding power inlet on your electronic device (e.g., DAC, powered speaker, game console, streamer). Ensure it is fully seated.
3. פאַרבינדן צו מאַכט אָוטלעט: Insert the 3-prong wall plug into a standard, grounded AC power outlet. Ensure the connection is secure.
4. באַשטעטיקן קשר: Confirm both ends of the cable are securely connected before powering on your device.

בילד 2.1: דעטאַלירט view of the C7 and 3-prong connectors for proper identification during setup.

3. אַפּערייטינג ינסטרוקטיאָנס

The AudioQuest NRG-Y2 Power Cable operates passively by supplying power to your connected device. No specific operational steps are required for the cable itself beyond ensuring a secure and stable connection.

• Ensure the cable is not bent or kinked sharply, which could damage the internal conductors.
• Avoid placing heavy objects on the cable.
• Confirm that the power outlet is functioning correctly and provides the appropriate voltagE פֿאַר דיין מיטל.

4. וישאַלט

Proper maintenance ensures the longevity and optimal performance of your power cable:

• רייניקונג: Use a soft, dry cloth to gently wipe the cable and connectors. Do not use liquid cleaners or abrasive materials.
• סטאָרידזש: When not in use, coil the cable loosely. Avoid tight coiling or sharp bends. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• דורכקוק: Periodically inspect the cable for any signs of damage, such as cuts, fraying, or bent pins on the connectors. If damage is observed, discontinue use and replace the cable.

5. טראָובלעשאָאָטינג

אויב איר טרעפט פּראָבלעמען, באַטראַכט די פאלגענדע טראָובלעשווטינג טריט:

• קיין מאַכט צו דיווייס:
  • Ensure both the C7 connector and the 3-prong wall plug are fully and securely inserted.
  • Test the power outlet with another device to confirm it is active.
  • קוק פֿאַר קיין טריפּט קרייַז ברעאַקערס.
• ינטערמיטאַנט מאַכט:
  • Re-seat both connectors to ensure a firm connection.
  • Inspect the cable for any visible damage. A damaged cable may require replacement.

If problems persist after performing these steps, contact AudioQuest customer support for further assistance.

6. ספּעסאַפאַקיישאַנז

7. וואָראַנטי אינפֿאָרמאַציע

The AudioQuest NRG-Y2 Power Cable is covered by a manufacturer's warranty. For specific details regarding warranty terms, duration, and claims procedures, please refer to the official AudioQuest website or contact their customer service directly. Retain your proof of purchase for warranty validation.

8. שטיצן

For additional assistance, technical support, or inquiries not covered in this manual, please visit the official AudioQuest website or contact their customer support team. You can typically find contact information and FAQs on their support pages.

אַודיאָקוועסט אפיציעל Webפּלאַץ: www.audioquest.com