Westek 6043BC

Westek 6043BC Touch Pad Dimmer Instruction Manual

מאָדעל: 6043BC

הקדמה

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

פּראָדוקט פֿעיִקייטן

  • Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
  • אַדזשאַסטאַבאַל ברייטנאַס: Offers three distinct light settings, ranging from a low night light to full brightness.
  • באַקוועם פּלאַן: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
  • מאָדערן סטייל: Features a contemporary black finish and sleek design that complements various home decors.
  • גרינג ינסטאַלירונג: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

זיכערקייַט אינפֿאָרמאַציע

Please read and understand all instructions before installation and use. Retain this manual for future reference.

  • בלויז פֿאַר דרינענדיק נוצן.
  • דו זאלסט נישט יקסיד די מאַקסימום וואַסערtage of 200 Watts for incandescent bulbs.
  • פאַרזיכערן די לamp is unplugged from the wall outlet before installation.
  • Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
  • Do not use this dimmer control with another dimmer in the same circuit.
  • האַלטן אַוועק פון וואַסער און נעץ.

סעטאַפּ און ינסטאַלירונג

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

  1. צוגרייטן די לamp: פאַרזיכערן דיין לamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
  2. פֿאַרבינדן דעם דימער: צאַפּן די לamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
  3. צאַפּן אין וואנט אָוטלעט: Plug the dimmer unit into a standard wall outlet.
  4. Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.
Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

אַפּערייטינג ינסטראַקשאַנז

Once installed, operate the dimmer as follows:

  1. אײַנשטעלן/אײַנשטעלן ליכטיקייט: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
  2. קער אַוועק: After the high brightness setting, touching the pad again will turn the lamp אַוועק.
  3. Power Outage: אין די געשעעניש פון אַ מאַכט אָtage, the dimmer may reset. Simply touch the pad to resume normal operation.

וישאַלט

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

טראָובלעשאָאָטינג

פּראָבלעםמעגלעך סיבהלייזונג
Lamp does not turn on or dim.
  • Lamp not properly plugged into dimmer.
  • Dimmer not properly plugged into wall outlet.
  • Lamp's internal switch is off.
  • Incompatible bulb (LED/CFL).
  • פאַולטי ציבעלע.
  • מאַכט אירtage or circuit breaker tripped.
  • פאַרזיכערן לamp cord is fully inserted into the dimmer.
  • Ensure dimmer is fully inserted into a working wall outlet.
  • דריי די לamp's original switch to the ON position.
  • Replace with a standard incandescent bulb (up to 200W).
  • פאַרבייַטן די ציבעלע.
  • Check your home's power supply and circuit breakers.
Lamp flickers or buzzes.
  • Incompatible bulb (LED/CFL).
  • לויזע גלאָביר פֿאַרבינדונג.
  • Replace with a standard incandescent bulb (up to 200W).
  • פאַרשטייַפן די ציבעלע אין זייַן כאָלעל.
Lamp turns on by itself occasionally.
  • Electrical interference (e.g., during thunderstorms, power fluctuations).
  • This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

ספּעסאַפאַקיישאַנז

  • מאָדעל: 6043 בק
  • סאָרט: וועסטעק
  • אָפּעראַציע מאָדע: ON-NONE-OFF (3-level dimming)
  • מאַקסימום וואַסערtage: 200 Watts (Incandescent bulbs only)
  • Voltage: 120 וו, 60 הז
  • קאָנטראָל אופֿן: ריר
  • נומער דימענשאַנז (L x W x H): 3.9 X 1 X 7.9 אינטשעס
  • נומער וואָג: 3.8 אונס
  • מאַטעריאַל: Multi (Brass contact material)
  • קאָליר: שוואַרץ
  • בלויז דרינענדיק נוצן: יא

וואָראַנטי און שטיצן

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek webפּלאַץ אָדער קאָנטאַקט זייער קונה סערוויס אָפּטיילונג.

פאַבריקאַנט: AmerTac

קונה סערוויס: 201.661.9945

Webפּלאַץ: www.amertac.com

© 2024 Westek. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.